For screen reader problems with this website, please call580-765-64885 8 0 7 6 5 6 4 8 8Standard carrier rates apply to texts.

JL Audio® Monoblock Class D Subwoofer Amplifier-RD1000-1

Model #: RD1000-1
136824
JL Audio
At a Glance

JL Audio® Monoblock Class D Subwoofer Amplifier with 1000 watts x 1 @ 2 O and 600 watts x 1 @ 4 O

Call for Best Price
$99,999.00Save

People also viewed:

Get to know this product.

Purpose-built for subwoofer applications, the RD1000/1 monoblock amplifier delivers 1000 watts of jaw-dropping bass output into 2 ohms (14.4V, 1% THD). At the heart of this ultra-sleek and compact power plant is JL Audio’s exclusive NexD™ Class D technology, permitting high power output with exceptional efficiency and low distortion.

For your convenience, all of the RD1000/1’s controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.

The RD1000/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity setting, quickly and accurately, with no special equipment needed. The RD1000/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. Control of the subwoofer level from the driver’s seat is easily accomplished with the addition of the optional RBC-1 remote level control (sold separately).

Rated Continuous (RMS) Power @ 14.4 V

  • @ 4 Ω: 600 W RMS x 1
  • @ 3 Ω: 800 W RMS x 1
  • @ 2 Ω: 1000 W RMS x 1

Rated Continuous (RMS) Power @ 12.5 V

  • @ 4 Ω: 500 W RMS x 1
  • @ 3 Ω: 650 W RMS x 1
  • @ 2 Ω: 800 W RMS x 1

Specifications

  • Frequency Response: 7 Hz - 500 Hz (+0, -1dB)
  • S/N Ratio, referred to highest rated power: >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W: >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Damping Factor @ 4 Ω: >1000 / 50 Hz
  • Damping Factor @ 2 Ω: >500 / 50 Hz
  • THD+N @ Rated Power: <1% @ 2 Ω per Ch.
  • Input Voltage Range @ RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
  • Min. Copper Power / Ground Wire Gauge: 4 AWG wire
  • Fuse Rating: 80 A (AFS, AGU or MaxiFuse™)

Signal Processing

  • Filter Mode(s): Low-Pass only
  • Filter Slope(s): 12 dB/octave
  • Filter Frequency Range: 50 Hz - 500 Hz
  • Bass Boost EQ: Yes
  • Remote Subwoofer Level Control: Optional (RBC-1)
  • Pass-Through Preamp Output: Buffered 
Useful Documents
Specifications

Connections

Analog Audio(RCA) Input:1

Misc. Specs

ColorBlack
Depth (in.)6.96
Width (in.)14.66
Height (in.)2.13
Preamp Outputs1
Amplifier ClassClass D
Amplifier Output (Watts)1000
Bluetooth CapableNo
Amplifier ChannelsMono Block
Rms Power Handling1000
Manufacturer Warranty2 Year
Impedance2 - 4 Ohms
Water ResistantNo
Speaker Level InputNo
Shallow MountNo
Digital InputNo
Number Of Outputs2
Minimum Impedance Unbridged2 Ohm
Number Of Inputs1
WarningProposition 65 Warning for California Residents